LBA2:Entity information

Entity information
Extension	F3D
Occurence	LBA2
Programs supporting this format
LBA File3D Editor
References
Find entries of this type

This is the LBA 2 equivalent to the LBA 1 File3d.hqr file. It contains entities of the game Actors.

Specification

--------------------------------------------------------------------------------
L I T T L E   B I G   A D V E N T U R E   2
LBA File3D format
Revision 1

Author:   Alexandre Fontoura [alexfont]
Email:    [email protected]

Last Modification: 13.11.2005


[#] [ INFORMATION ] ------------------------------------------------------------

This document describes the format in which the LBA2\Twinsen Odyssey File3D 
character informations) are stored in.


[#] [ NOTE ] -------------------------------------------------------------------


In LBA2 this only exists in one unique file which as all this information inside.
This file can be found inside Ress.HQR in the entry 44 (LBA2 Character Informations).


[#] [ FORMAT ] -----------------------------------------------------------------

s32 = signed int (32bit)
u16 = unsigned short (16bit)
s16 = signed short (16bit)
byte (8bit)
+ = to add previeous bytes count

The file is laid out like an HQR file, but does not have the size/compression header
at each offset given. Refer to the HQR document on how to read the intro.

00:	s32	First offset


Do this "number of entries" times
[ Entries ]

First of all you need to read the entry  content for each entry of course.
I'll assume you know this. Also you need to create a variable or structures
to handle the anim and body content and count.

Do the next block while the read byte is not 0xFF (End of each entry content).

[ Content ]
+00:	byte	Opcode

Opcode = 1 -> Body content
Opcode = 3 -> Anim content


[ Body = 1 ]
+00:	byte	Body index
01:	byte	Body data size - 1 (only take the following values)
		|-> 0x04 (4) -> When no collision box is used
		|--> 0x11 (17) -> When used a collision box
02:	s16	Body real index (in BODY.HQR)
04:	byte	Collision box flag
		|-> flag = 0x00 (0) -> Model doesn't use collision box
		|--> flag = 0x01 (1) -> Model use collision box

[ IF Collision box flag is set ]
05:	byte	Number of bytes to read minus 2. 
		In this case the value is always 0x0E, so it will have more 0x0E-0x02 = 0x0C bytes
06:	u16	X (bottom left)
08:	u16	Y (bottom left)
0A:	u16	Z (bottom left)
0C:	u16	X (top right)
0E:	u16	Y (top right)
10:	u16	Z (top right)

[ /IF ]

[ / Body ]


[ Anim = 3 ]
+00:	byte	Anim index
01:	byte	Anim real index (in ANIM.HQR)
02:	byte	Data size - 3
03 until Data Size:	??

[ / Anim ]


[ / Content ]

[ / Entries ]

---

Information provided by: Alexfont

EDIT: I will eventually fix this document, but want to make sure this info is not lost,

8bit anim
8bit unknown
16bit real anim
8bit num of anim actions in this instance
for this num of actions do
    8bit action type
    if type=0x06 - sample sounds (will play the sample in the specified animation keyframe)
         8bit keyframe
         16bit sample
    if type=0x10 or type=0x0F - brick sample (I didn't find yet why we have 2 action for the same thing)
         8bit keyframe (this will play the sample according with the brick type in the specified animation keyframe)
   if type=0x09 - throw projectile (don't know yet the meaning of the content)
 end for

Actions from LBA1 - can be the same

enum ActionType {
	ACTION_HITTING           = 0,
	ACTION_SAMPLE            = 1,
    	ACTION_SAMPLE_FREQ       = 2,
    	ACTION_THROW_EXTRA_BONUS = 3,
	ACTION_THROW_MAGIC_BALL  = 4,
	ACTION_SAMPLE_REPEAT     = 5,
	ACTION_UNKNOWN_6         = 6,
	ACTION_UNKNOWN_7         = 7,
	ACTION_SAMPLE_STOP       = 8,
	ACTION_UNKNOWN_9         = 9, // unused
	ACTION_SAMPLE_BRICK_1    = 10,
	ACTION_SAMPLE_BRICK_2    = 11,
	ACTION_HERO_HITTING      = 12,
	ACTION_UNKNOWN_13        = 13,
	ACTION_UNKNOWN_14        = 14,
	ACTION_UNKNOWN_15        = 15,
    ACTION_LAST
};



Omni provided the below info:

0x9 Throw the magic ball
8bit_s trigger key frame 
16bit_u y-offset from the actor's yposition from which the ball will be thrown
16bit_s vertical angle (adjusting the incline of the throw)
16bit_s velocity
8bit_s gravitational acceleration g

0x8 Throw extra
8bit_s trigger key frame 
16bit_u y-offset from the actor's yposition from which the ball will be thrown
8bit_u type of extra (sprite id)
16bit_s vertical angle (adjusting the incline of the throw)
16bit_s velocity
8bit_s gravitational acceleration g
8bit_s harmfulness of extra

0x5 Hit near objects
8bit_s trigger key frame
8bit_s hit force

0x17 Twinsen attack
8bit_s trigger key frame
this action is using a hard-wired lookup-table to choose the hit force using twinsens magic level.
i didn't know twinsens hit force increased with his magic level  

0x18 throw extra from custom offset into a custom direction
8bit_s trigger key frame
16bit_s offset x
16bit_s offset y
16bit_s offset z
8bit_s type of extra (sprite id)
16bit_s vertical angle 
16bit_s horizontal angle 
16bit_s velocity
8bit_s gravitational acceleration
8bit_s harmfulness of extra
these values all have to be interpreted relative to actor position and actor angle.

0x19 throw extra from custom offset into custom direction STRANGE VERSION
8bit_s trigger key frame
16bit_s offset x
16bit_s offset y
16bit_s offset z
8bit_s type of extra (sprite id)
16bit_s vertical angle 
16bit_s horizontal angle 
16bit_s velocity
8bit_s gravitational acceleration
8bit_s harmfulness of extra
the strange part of this version is, that an additional angle offset is added to the vertical angle. this offset is calculated this way:

does someone has an idea what this used for? maybe to throw grenades?

0x20 shoot a persecuting extra (aiming to hit another actor)
8bit_s trigger key frame
16bit_s offset x
16bit_s offset y
16bit_s offset z
8bit_s type of extra (sprite id)
8bit_s targeted actor (strange that this is fixed O_o)
16bit_s maxSpeed
8bit_s harmfulness